David Stephenson

Testing the manual exposure controls for Canon 5D Mark II firmware update

Canon released a major firmware update 1.1.0 for the 5D Mark II on June 1, 2009, which will finally allow users to have manual exposure control while recording video.

I tested out the new controls and have found them to be easy to use and very functional. One interesting surprise is the increase in available shutter speeds. Previously, the camera limited shutter speeds from 1/30th to 1/125th. Now, shutter speeds up to 1/4000th can be used in manual exposure mode. It’s unclear where the shutter speeds will top out when in one of the automatic modes since you can’t see your exposure settings in those modes.

Shutter speed appears on the left, then aperture.

To use the manual exposure while recording video, you must have the camera set in Manual (hello Mr. Obvious). I use the top control dial to change the shutter speed and the rear control wheel to change my aperture. You can see your exposure changes on the LCD screen and you can see your shutter speed, aperture and ISO settings as well.

If you have your ISO set to AUTO, though, then the camera reverts back to a kind of automatic exposure setting even if you are in Manual exposure mode. What happens is this: if you are setting your aperture and shutter speed and you have ISO set to auto, then the camera automatically adjusts the ISO up and down to give you a correct exposure. This will not allow you to over- or under-expose your image until you max out the range of the ISO. And you won’t be able to use exposure compensation, either. So I would advise NOT using the ISO AUTO setting while in manual exposure mode – kind of defeats the purpose.

Here are some other tips I have found to be true with this firmware update:

• If you use the shutter or aperture priority modes, the camera will go into a modified auto exposure mode – you won’t really be giving priority to the shutter speed or aperture. It appears that it reverts to the old way of auto-exposing but it’s hard to verify that.
• If you set the ISO to “AUTO” and are in manual exposure mode, you can see the ISO numbers on the LCD by pressing the AE lock button (asterisk) or tapping the shutter button. By default, it appears that the display will show ISO AUTO until you press one of those buttons.
• When using manual exposure mode, AE lock and exposure compensation cannot be set (’cause, well, your manual settings are doing that for you).
• If you set the ISO to “AUTO” when shooting movies in manual exposure mode it is possible to set the aperture and shutter speed and the ISO will adjust for the exposure. So this amounts to having combo Aperture/Shutter Priority mode.
• When ISO is set to “AUTO” the range will be 100-6400 even if the ISO expansion is set.
• When manually setting the ISO and enabling ISO expansion range will include H1 (ISO 12800).
• Shutter speed range will be 1/30 – 1/4000 sec.  The faster the shutter speed the less smooth the subjects movement will appear to be.
• If “screen setting” is set to “stills display” or “exposure simulation” manual exposure for the movie mode will not be possible.

This entry was posted on Tuesday, June 2nd, 2009 at 9:31 am. It is filed under 5d mark II, Hands On, photo journal and tagged with cameras, canon, video. You can follow any responses to this entry through the RSS 2.0 feed.